Plate magnets, magnetic bars, grate magnets and separators, made to your size and duty. Send a photo or drawing for a quote.
NewPlate magnets up to 10,000 Gauss. 100% full weld.Get clear on which magnetic separator type you need — in minutes. Grate, drawer, plate, suspension / overband, liquid line / filter or bar magnets: tell us what you process, or send a photo, and we will guide you to the right choice.
Guidance is general; size, grade, gauss and build details are confirmed at quotation. No published prices or stock levels.
Magnets that fit your process for industry. Almost everything is possible: sizes, grades, housings, food-grade options and drawing-based builds. We start with sensible advice, make the choice simple, then work systematically toward a magnet that fits your process — from Shah Alam across Malaysia.
A magnetic separator uses permanent magnets to remove ferrous contaminants (iron, steel filings, tramp metal) from powders, liquids or bulk solids — protecting product quality and downstream equipment. Industrial plants in Malaysia typically specify grate, bullet, drawer, pulley or plate magnets, often in the 10,000–13,000 gauss range for rare-earth designs.
Arrowmatics Magnets — legal entity Arrowmatics AI Sdn Bhd (1305806-W) — can customise sizes, grades, housings and finishes, including food-grade options, to suit the line or drawing. ASEAN inquiries welcome. WhatsApp +60 12-211 2522 for sensible advice and a written quote.
Choose by how your product moves. Free-flowing powder or granules falling through a hopper or chute usually points to a grate or drawer magnet. Material on a conveyor belt points to a suspension (overband or suspended plate) magnet. Liquids, sauces and slurries in a pipeline point to a liquid line / filter magnetic trap. Not sure? Send a photo to the Magnet Expert — we will guide you.
Best for: dry powders and granules in a hopper or chute. Larger-diameter bars suit bigger openings and heavier tramp metal.
Best for: the same duty in a housing, where the magnet rows slide out for cleaning without stripping the line.
Best for: chute walls or hung over a falling stream or belt, with an easy-wipe surface. Full-weld SS304/316/316L builds available.
Best for: pulling tramp iron off bulk material on a conveyor. Overband types clear the iron on a running belt; suspended plates are cleaned by hand.
Best for: liquids, sauces, pastes and slurries moving through a pipe, where fine iron must be caught in-line.
Best for: tanks, hoppers and chutes, or as the bars inside a custom grid. Full-weld bars are available built to order; confirm the build at quotation.
To size one, we need: the material, flow rate, particle size, moisture, contaminant, temperature, pipe or chute size, and ideally a photo. or WhatsApp +60 12-211 2522.
Send a photo, sketch or drawing — circle the problem — and Magnet Expert gives sensible, simple, systematic advice toward a custom-fit magnet. Then get a written quote on WhatsApp.
Upload a machine photo, hopper, pipe or line — or a hand sketch/drawing. Circle or point at the problem area.
Tell Magnet Expert the product, duty, size, quantity and what you need (ferrous control, grade or housing).
Get a sensible, simple, systematic separator / suspension / NdFeB / SmCo recommendation — customised to fit where practical — then WhatsApp for a written quote.
Standard industrial ranges plus almost-anything-to-drawing options — sizes, grades, housings and food-grade configurations for separators, suspension magnets, NdFeB and SmCo.
Grate, bullet, drawer, pulley and plate magnets for food, plastics, recycling and bulk materials. Food-grade options. Typical rare-earth field: 10,000–13,000 gauss.
Sintered neodymium grades N35–N52 for motors, sensors, fixtures and OEM assemblies. Coatings and sizes quoted to drawing.
High-temperature rare-earth magnets (SmCo5 / Sm2Co17) when heat or corrosion rules out NdFeB. Quoted to drawing.
SmCo magnets & quote →
Continuous seal welds in SS304/SS316/SS316L, no crevices, no exposed fasteners and a smooth, cleanable finish. Designed to support your HACCP and ISO 22000 food-safety programme, with a strong ferrous foreign-body control you can inspect and clean with confidence.
Typical rating; confirm per application and air gap. Customers remain responsible for their own certification.
Product photos from our stock — grate, hopper grate, drawer, plate, liquid trap, suspension magnets and more. Demos show pull distance and surface Gauss on plate magnets.
We supply magnet systems that protect product quality, equipment and handling safety across these industries:
We do not force a catalogue item into your line. We understand the duty, simplify the choice, then build the clearest path to a magnet that fits.
Sizes, grades, housings, food-grade options and drawing-based builds are all on the table. We start from your process, not a forced standard size.
We give the best sensible advice first, make the technical choice simple, then work systematically through fit, materials, dimensions and quote.
Send a photo, sketch or drawing with duty, size and quantity to +60 12-211 2522. We reply with a written, fit-led quote — no invented prices or certifications.
Magnetic bars, grate magnets, plate magnets and separators, made to your size and duty. Full-weld stainless steel (304, 316 or 316L) is available, built to order for food and hygiene-sensitive lines, with no screws or nuts to trap deposit. Not every model is full weld, so we confirm the build at quotation.
What to send: a photo, sketch or drawing, plus the size, strength and where it will be used. We will recommend a simple build and quote.
Separators, suspension magnets, NdFeB and SmCo magnets supplied from Shah Alam to plants across Malaysia. ASEAN inquiries welcome.
Browse separators → NdFeB grades →
